home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ShareWare OnLine 2
/
ShareWare OnLine Volume 2 (CMS Software)(1993).iso
/
network
/
blts493.zip
/
HG3.TXT
< prev
next >
Wrap
Text File
|
1991-12-26
|
6KB
|
107 lines
LANtastic Network Operating System v4.00 Technical Bulletin
Product Reviewed: Harvard Graphics v3.0 by Software Publishing Corp.
Classification: Desktop Publishing
Date: 11/27/91
Engineer: MH
Compatibility Statement
Harvard Graphics version 3.0 has been tested as compatible with LANtastic 4.x. This bulletin has
been designed to help with the installation and setup of this product.
Network Information
The appendix B in the Harvard Graphics Network Administrator's Manual does not cover
LANtastic NOS. Instead, you may want to refer to the following section for using Harvard
Graphics on NOS 4.0:
1. Create a user personal directory on each user's workstation or under a home directory. This
directory is used to store each user's unique Harvard Graphics configuration files and
personal dictionaries. The maximum number of concurrent users allowed is governed by
your Node License Pack.
2. Log on to the server machine as a user with sufficient rights to create directories, files, etc.
3. Create these sharable resources from NET_MGR with the specified access rights on the
server machine (You may want to create the directories on the server's local drive and then
redirect a network drive, say L:, to point to the root of the drive):
Directory Users/Groups Access Rights Files
L:\HG3 * R---L---E--- HG3 program files, HG3.INF, HG3.NET
L:\HG3\LOG * RWC-L---E--- HG3.LOG and HG3NOACC.LOG are
created.
4. Install Harvard Graphics and the network utility files to the directories you just created. See
Chapter 1 of the Network Administrator's Manual and the next section in this bulletin. The
installation will ask you to choose the drive letter under which you put all the Harvard
Graphics files. It is recommended that you pick a common drive letter to be used by all
nodes on the network to simplify the set up of each workstation.
5. Run HG3NETST to access the LAN Setup Menu and set the path for the user's personal
directory to point to the ones you created in step 1. This personal directory is going to hold
each user's configuration files HG3.CF3, HG3.FGF and the dictionary files.
6. Also set up the path for the log file directory based on the resources you created in step 3.
7. Installation on the Harvard Graphics server is completed. To invoke HG3 from a workstation:
- Log onto the Harvard Graphics server.
- Redirect a drive to point to the \HG3 directory, e.g. net use l: \\<server>\HG3
- Add the \HG3 directory to the DOS PATH command in the workstation's AUTOEXEC.BAT
file.
- When HG3 is invoked, Harvard Graphics will refer to your personal directory specified in
HG3NETST for your particular set up configuration. A user can also identify a
directory by using the /p option on the command line to override the pre-defined
directory, e.g. hg3 /p l:\hg3\users\%username%. This is useful for workstations that do
not have hard drives or when each user wants to put his personal files under directories
with different names.
- To customize your workstation setting, select the Setup option from the Harvard Graphics
main menu when you run HG3 for the first time on your workstation. Your personalized
program defaults will be stored in the file HG3.CF3 on your personal directory.
Installing Harvard Graphics
To install Harvard Graphics on any node on the network, follow closely the steps outlined in the
1-page Getting Started with Harvard Graphics guide and Chapter 1 of the Setup Manual. During
our testing, we have discovered the following 2 minor issues besides the system requirements
listed on page 1-1 of the Setup manual:
- There must be at least 560K of free disk space left on the drive after the Harvard Graphics files
have been installed. Otherwise, you will need to remap your 'work directory' to some other
area that has room for the temporary work files created during a Harvard Graphics section.
See page 2-6 of the Setup Manual for details. If you have set up a printer or a film recorder
that has hardware fonts, you may need up to 600K more bytes of free temporary work space.
- If any of the workstations on your network does not have a mouse, you may want to get a
driver called 'NOMOUSE.EXE' to avoid the error message 'Unable to locate a mouse driver'
whenever you invoke HG3 from the mouse-less node. Please refer to their Compuserve
forum for details.
Software Publishing Corp. recommends that BUFFERS=20 in your CONFIG.SYS if you are not
using a disk cache utility. The DOS SHARE program should be loaded on the server.
Optimizing Harvard Graphics
Using extended or expanded memory as a disk cache gives you optimum performance in
Harvard Graphics. EMS and XMS are covered in great detail in the section under Optimizing
Performance in Chapter 1 of the Setup Manual.
Printing
To set up your printer on Harvard Graphics is relatively straight forward. Just redirect the device
(e.g. LPT1, LPT2) using the net use command and specify that as your output port from the
Setup menu (option 8 from the main menu).
Summary
This document has been designed to help with the installation and setup of Harvard Graphics
3.0 on LANtastic and to provide a guideline for trouble shooting. If a problem arises which cannot
be resolved through this bulletin, please contact our technical support staff at (602) 293-6363.
Any questions or suggestions on this bulletin may be mailed to our office:
Artisoft, Inc., 691 East River Road, Tucson, AZ 85704.
ATTN: Compatibility Department / Harvard Graphics 3.0 Support.
Vendor Info
Software Publishing Corp., 1901 Landings Drive, Mountain View, CA 94039-7210.
Phone (408)988-4005 Fax (408)980-1518.
ARTISOFT, Inc. makes no warranties as to the completeness or accuracy of this
document. LANtastic is a trademark of ARTISOFT, Inc. Brand names, company
names, and product names are trademarks or registered trademarks of their
respective companies.